Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Cleaning & Sweep Across Danvers
Chimney cleaning and sweep in Danvers typically runs $180-$320 for a standard annual service, while a full NFPA 211 Level 2 inspection with camera documentation starts at $295. Most Danvers appointments are scheduled within a week, and our crews are already working the North Shore daily. Call (351) 444-9705 for a written estimate before anyone steps into your home.
We know Danvers chimneys. The center-chimney colonials near High Street and the pre-Revolutionary homes around Hobart Street weren’t built for today’s heating appliances, and the salt air rolling in from Salem Harbor doesn’t give the masonry any mercy. Our Chimney Cleaning & Sweep team has documented thousands of North Shore flues since 2009, and we’ve learned that a Danvers chimney demands more than a brush and a vacuum. It needs a technician who understands lime mortar that started failing before the Revolutionary War, freeze-thaw cycling that hits harder here than inland, and the fuel-conversion shortcuts previous owners buried inside multi-flue stacks.
Why Level Two Chimney Haverhill Is Danvers’s Preferred Chimney Cleaning & Sweep Company
We’ve completed more than 38,000 chimney inspections and cleanings since 2009, and a significant share of those have been on the North Shore. Danvers homeowners find us because they read the three-star reviews first, and those reviews mention the same thing: we show the photos, we name the price in writing, and we don’t start work until both are agreed. That’s Haven Standard Clause 1, and it’s how we’ve operated from day one.
Our scheduling runs from the Boston office, but our crews live and work this corridor daily. That means we’re not driving up from Worcester or down from New Hampshire when you book a sweep in Danvers. We’re already here. Calls are answered live, 24 hours a day, by a person who can see open appointments and book you directly.
Corrine Halstead built this practice around a simple idea: the inspection standard should be in the company name. Level Two means NFPA 211 Level 2, camera down the flue, every time. Not an upsell. Not a premium package. The default.
Our Chimney Cleaning & Sweep Services in Danvers

Level 1 Inspection
A Level 1 inspection is a visual examination of the readily accessible portions of your chimney and fireplace system. In Danvers, we recommend this only for newer homes or systems that have been under continuous annual care with no changes in appliance or fuel type. For the 18th-century center-chimney colonials that define Danvers’s historic core, a Level 1 is rarely sufficient. You can’t see inside a shared flue from the hearth, and you can’t assess lime-mortar deterioration behind the bricks without a camera. If your home sits near Salem Harbor and you’ve never had a documented internal inspection, we’ll recommend starting with Level 2.

Level 2 Inspection
This is our standard in Danvers, and it’s what most homeowners here actually need. NFPA 211 Level 2 requires a camera scan of the entire flue interior, examination of the attic and crawl space where accessible, and documentation of the smoke chamber, flue liner, and chimney crown condition. Clause 4 of the Haven Standard requires a photo record on every job, so you receive dated images of what we found, not a verbal summary. In Danvers’s oldest neighborhoods, we regularly discover that a flue serving a gas insert on the first floor shares a run with an oil boiler in the basement, or that a flue has no liner at all despite decades of appliance use. The camera doesn’t guess. It shows.

Creosote Removal
Creosote builds in stages. First-degree is flaky soot, easily brushed. Second-degree is granular and requires more aggressive tools. Third-degree, or glazed creosote, is a tar-like coating that a standard brush won’t touch and that poses the highest chimney fire risk. Danvers’s damp coastal winters and homeowners who burn intermittently create ideal conditions for third-degree buildup. We see it especially in homes near the water where marginal draft from salt-corroded caps slows exhaust flow. Our crews carry rotary chains, chemical modifiers, and the patience to remove glazed deposits without damaging underlying flue tiles. If we find third-degree creosote, we’ll show you the camera footage, explain the removal process, and give you a written price before any additional work begins.

Soot Removal
Soot is the carbon residue from incomplete combustion, and in Danvers it carries an extra complication: salt-laden air accelerates corrosion of caps and dampers, which reduces draft efficiency, which increases soot deposition. It’s a feedback loop we break with proper cleaning and by identifying the hardware failure that started it. Our soot removal service includes full brush-and-vacuum cleaning of the flue, smoke chamber, and firebox, plus inspection of the cap, crown, and damper for corrosion damage. We use HEPA containment to protect your home’s air quality during the process.

Annual Sweep
The NFPA recommends annual inspection for all chimney systems, and cleaning as needed based on use and fuel type. In Danvers, we push harder on this interval than we might inland. The freeze-thaw cycling from November through March, the salt air, and the age of the housing stock mean that a year of neglect here does more damage than a year elsewhere. An annual sweep from our team includes the full cleaning, a Level 2 camera inspection, and a documented photo record. You’ll know exactly what condition your chimney is in, what if anything needs attention, and what it will cost to address it.

Fireplace Cleaning
Fireplace cleaning addresses the firebox, hearth, and visible surround, but in Danvers we treat it as part of a system assessment. The firebox tells us about combustion efficiency, which tells us about creosote production upstream. A clean fireplace with a damaged smoke chamber or deteriorating flue liner is a false comfort. We clean thoroughly, then document what the camera found above.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Danvers
We source materials through Haven’s buying network to keep customer prices honest, and we stock components from HeatShield, Gelco, and Olympia Chimney for common North Shore repairs. HeatShield cerfractory flue liner resurfacing is particularly valuable in Danvers’s older chimneys where full liner replacement would require dismantling historic masonry. Gelco stainless caps and flashing withstand coastal salt far better than the galvanized hardware we regularly pull off failing Danvers chimneys. Olympia Chimney supplies UL-listed liners and fittings for proper oil and gas appliance venting. Because we maintain local inventory, most repairs don’t wait on shipping.
Common Chimney Cleaning & Sweep Problems We See in Danvers Homes

- Spalling crowns and open mortar joints from salt air and freeze-thaw. Danvers sits close enough to Salem Harbor that salt-laden coastal air accelerates mortar erosion on exposed chimney crowns, while the North Shore’s frequent winter freeze-thaw cycling drives water deep into cracked joints and fractures masonry faster than inland. We regularly find crowns that have gone soft and mortar that crumbles at finger pressure.
- Improper fuel-conversion connections in multi-flue center chimneys. Previous oil-to-gas conversions in Danvers tie a boiler or insert into a flue already shared with another appliance and skip the flue liner entirely, leaving draft and carbon-monoxide risk that no brush-and-vacuum sweep will catch. The camera finds what decades of assumptions missed.
- Galvanized caps and hardware rusted through from coastal exposure. Homeowners here treat a sweep as “burn or no burn” and skip the annual inspection, so galvanized caps, flashing and damper hardware rust through unnoticed. By the time water stains appear on the ceiling, the damage has spread to the framing.
- Third-degree creosote from marginal draft and intermittent burning. First-degree creosote advances toward the third-degree tar glaze a brush can’t touch when draft is compromised by corroded caps or when homeowners burn small, cool fires. Danvers’s damp winters make this progression faster than the NFPA’s generic guidance assumes.
Pricing for Chimney Cleaning & Sweep in Danvers, MA
We’re transparent about pricing because Haven Standard Clause 1 requires a written price before any work starts. Here’s what chimney cleaning and sweep services cost in the Danvers market:
| Service | Price Range in Danvers |
|---|---|
| Annual Sweep with Level 1 Inspection | $180 - $260 |
| Annual Sweep with Level 2 Camera Inspection | $295 - $395 |
| Third-Degree Creosote Removal (per flue) | $450 - $750 |
| Fireplace Cleaning Only (no flue work) | $140 - $195 |
| Multi-Flue Center-Chimney Assessment (Level 2, all flues) | $425 - $625 |
Factors that affect your specific price: number of flues, accessibility of the chimney top, severity of creosote buildup, and whether previous modifications require additional documentation. We don’t charge extra for the photo record, Clause 4 of the Haven Standard makes that standard. Every estimate is free, written, and delivered before work begins. Call (351) 444-9705 to schedule.
We Also Serve Cities Near Danvers

Our crews work the full North Shore corridor daily. If you’re in Danvers or nearby, we’re already in your area: Peabody to the south, Beverly and Salem along the coast, Lynnfield to the west. Scheduling is coordinated from our Boston office, but the technician who arrives at your door knows these communities and their chimneys.
Serving Danvers, MA - Our Local Coverage Area
We’re based in the Danvers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Cleaning & Sweep in Danvers

A standard sweep cleans what a brush can reach, but it doesn’t see inside the flue. Danvers’s oldest center-chimney colonials pack four or more independent flues into a single 1700s lime-mortar stack, and previous fuel conversions often tied appliances into shared or unlined flues that no visual check from the hearth can detect. The camera scan in a Level 2 inspection reveals these hidden conditions before they become safety hazards. Call (351) 444-9705 for a written quote, estimates are free.
Yes. Salt-laden coastal air accelerates corrosion of galvanized caps, flashing, and damper hardware, while the freeze-thaw cycling near 32°F from November through March pushes water into lime-mortar joints that have been deteriorating for two centuries. The result is faster crown spalling, more rapid mortar decay, and earlier hardware failure than chimneys see even a few miles inland. An annual inspection catches this progression before structural damage requires major rebuild work. Call (351) 444-9705 for a written quote, estimates are free.
The crown and cap. On a center-chimney colonial off High Street, our tech dropped a camera down what the homeowner thought was a dedicated gas-insert flue and found the oil burner tied into the same run a floor below, two appliances, one unlined flue, no cap worth keeping, and a crown that had gone soft from years of salt-laden fog. We pulled the deteriorated galvanized cap and spalling crown material, reset the crown, ran a HeatShield liner for the gas appliance, and swept the remaining wood flues clean of first-degree creosote that had never been touched. Call (351) 444-9705 for a written quote, estimates are free.
Third-degree creosote appears as a thick, shiny black or brown tar-like coating that sounds glassy when tapped. A standard brush won’t remove it. We confirm the diagnosis with the camera during Level 2 inspection, then show you the footage. In Danvers, we see third-degree buildup most often in chimneys with corroded caps that reduce draft, or in homes where homeowners burn small, cool fires. Removal requires rotary chains or chemical treatment, and we quote that work in writing before starting. Call (351) 444-9705 for a written quote, estimates are free.
Because the chimney serves your heating appliance even if you never light a decorative fire. Oil and gas appliances produce corrosive condensation and can backdraft carbon monoxide if the flue is obstructed or shared improperly. In Danvers’s oldest homes, the same chimney that once served a parlor fireplace may now vent your boiler. The annual sweep and inspection verifies that all active flues are clear, properly lined, and correctly separated, regardless of how often you burn wood. Call (351) 444-9705 for a written quote, estimates are free.
Ready to see what’s actually inside your chimney? Call (351) 444-9705 to schedule a free written estimate. We’ll arrive with a camera, a written price, and the patience to explain exactly what your Danvers chimney needs, no pressure, no surprises, just documentation you can keep. The 365-Day Done Right Promise backs every job, and our Free Second Opinion on any written estimate means you can compare with confidence. Corrine Halstead and the team at Level Two Chimney Haverhill are ready when you are.
Written by Corrine Halstead, Owner at Level Two Chimney Haverhill, serving Danvers and the North Shore since 2009.





Before
After
Before
After
Before
After