Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Danvers
Chimney repair in Danvers typically runs $850-$4,200 depending on scope, with mortar repointing on a center-chimney colonial starting around $1,800 and full rebuilds of deteriorated multi-flue stacks reaching the upper end. Most Level 2 inspections with camera documentation are completed same-week, and our Chimney Repair in Danvers crews dispatch from our Boston office with materials sourced for North Shore masonry conditions. Call (351) 444-9705 to book a free estimate - every written quote includes a camera inspection, photo record, and documented scope before any work begins.
We’ve worked on Danvers chimneys since 2009. That means center-chimney colonials off Centre Street with four flues sharing one stack, 19th-century Victorians near Danvers Square with crumbling crowns, and post-war ranches off Route 114 where flashing failures have gone undiagnosed for years. The colonial-era housing stock here is unlike anywhere else on the North Shore, and the repair approach has to match it.
Why Level Two Chimney Haverhill Is Danvers’s Preferred Chimney Repair Company
We’ve completed more than 38,000 chimney inspections since 2009, and a significant share of those have been in Essex County. Danvers homeowners find us because they read the three-star reviews first - they want to know how we handle it when something goes wrong. The 365-Day Done Right Promise means we make it right, period. That’s Haven Standard practice, not a marketing line.
Our response time to Danvers is typically 2-4 business days for standard repairs, with emergency calls triaged by our live phone team 24/7. Dispatch is coordinated from our Boston office, but the crew that arrives at your door knows Danvers: they know the salt air off Salem Harbor eats mortar faster than inland, they know the freeze-thaw cycling on the North Shore fractures brick faces by March, and they know a center-chimney colonial on Hobart Street has different flue geometry than a split-level near Liberty Tree Mall.
Every technician is background-checked, uniformed, and named on your appointment confirmation. You get a text when they’re en route. License information is displayed on every page, and every job - every single one - gets a written price before work starts, a camera-scan photo record under Haven Standard Clause 4, and a written warranty on completion. No exceptions.
Our Chimney Repair Services in Danvers

Mortar Repointing
Original lime mortar in Danvers’s 1700s center-chimney colonials has been deteriorating for two centuries. Repointing isn’t just grinding out joints and slapping in new material - on these multi-flue stacks, we map the flue positions first with a camera scan so we don’t compromise a flue wall during grinding. A typical repointing job on a Danvers center-chimney colonial runs $1,800-$3,400. We use HeatShield-compatible refractory mortars where the smoke chamber has degraded, and we document every joint with photos before and after.

Spalling Brick Repair
Spalling - the flaking and fracturing of brick faces - is epidemic in Danvers because of the specific combination of salt-laden coastal air and repeated freeze-thaw cycling. Temperatures here oscillate near 32°F for weeks each winter, driving water deep into cracked mortar joints, then expanding it. Repointing alone won’t hold where spalling is advanced. We cut out damaged brick, match replacement stock to the original firing, and seal the crown to stop the water source. Spalling repair with partial brick replacement on a Danvers chimney typically runs $2,200-$4,200.

Chimney Waterproofing
Waterproofing a Danvers chimney starts with diagnosing where the water is actually entering. On colonial center chimneys, a flashing failure at the roof line often surfaces in a different flue’s firebox two floors down - so crews that skip a full Level 2 inspection treat the symptom, not the source. We apply vapor-permeable sealants (never film-forming coatings that trap moisture) after camera confirmation of the leak path. Waterproofing with diagnostic camera work runs $950-$1,800 in Danvers.

Flashing Repair
Flashing on Danvers’s older homes is often original galvanized steel, corroded by decades of salt air, or was replaced with improper counter-flashing that doesn’t integrate with the masonry. We fabricate custom flashing to match the roof pitch and chimney configuration, using materials from our Haven buying network. On multi-flue center chimneys, we inspect all flue bases during flashing work - the leak you called about may be the smaller problem. Flashing repair in Danvers typically runs $1,200-$2,600.

Chimney Rebuilding
When a center-chimney colonial’s stack has deteriorated past the point of spot repair, we rebuild in lifts, salvaging sound brick and documenting every flue’s position before disassembly. A full rebuild of a four-flue center chimney in Danvers, with new DuraFlex liners installed in each active flue, typically runs $8,500-$14,000. We don’t quote rebuilds without a camera inspection - ever. Clause 4 of the Haven Standard requires it, and on these chimneys, skipping it would mean guessing at flue cross-connections hidden inside the masonry.

Tuckpointing
Tuckpointing on Danvers’s historic homes requires color-matching the original lime mortar’s aggregate and finish texture. We grind to proper depth - minimum 3/4 inch - and tool joints to match the original profile. Tuckpointing with full mortar analysis and matching runs $2,400-$4,800 on a typical Danvers colonial chimney.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Danvers
We source materials through Haven’s buying network specifically to keep customer prices honest. For Danvers’s demanding conditions - salt air, freeze-thaw cycling, and multi-flue center chimneys - we stock DuraFlex stainless liners for proper appliance venting, HeatShield refractory materials for smoke chamber restoration, and Olympia Chimney components for crown and cap replacement. Gelco caps are available for custom sizing on oversized colonial flues. Parts are warehoused for North Shore dispatch, so we’re not waiting on freight while your chimney leaks.
Common Chimney Repair Problems We See in Danvers Homes

- Two-century lime mortar erosion. Original lime mortar in Danvers’s pre-Revolutionary center-chimney colonials has been deteriorating since the 1700s. Salt-laden Salem Harbor air accelerates the erosion, and North Shore freeze-thaw cycling drives water deep enough to fracture brick faces. Repointing alone won’t hold where spalling brick and a cracked crown are actively leaking water into the stack.
- Improper fuel-conversion venting. Prior oil-to-gas or wood-stove conversions in Danvers often left appliances tied into the wrong flue - or into a flue already shared with another appliance - with no flue liner ever installed. A cross-connection that vented combustion gases into an unsealed adjacent flue for decades. Only a camera inspection reveals it. A Level 2 inspection should always catch it.
- Undiagnosed flashing leaks on multi-flue chimneys. Multiple flues sharing one oversized center chimney means a flashing failure at the roof line can surface in a different flue’s firebox on the first floor. Crews that skip a full Level 2 inspection chase interior water damage while the actual source remains open to the weather.
- Glazed third-degree creosote in converted flues. When a gas or oil appliance was improperly tied into a wood-burning flue, the reduced draft temperature allows creosote to condense and glaze on the flue walls. The appliance “re-breathes” those gases. We’ve found this condition in Danvers homes where the conversion was done 30 years ago and never inspected since.
Pricing for Chimney Repair in Danvers, MA
| Service | Typical Range in Danvers |
|---|---|
| Level 2 Inspection with Camera Scan | $275-$425 |
| Mortar Repointing (center-chimney colonial) | $1,800-$3,400 |
| Spalling Brick Repair with Replacement | $2,200-$4,200 |
| Chimney Waterproofing with Diagnostic | $950-$1,800 |
| Flashing Repair (custom fabricated) | $1,200-$2,600 |
| Tuckpointing with Color Matching | $2,400-$4,800 |
| Smoke Chamber Restoration (HeatShield) | $1,600-$3,200 |
| Full Chimney Rebuild (4-flue colonial) | $8,500-$14,000 |
These ranges reflect Danvers’s specific conditions: the complexity of multi-flue center chimneys, the premium on matching historic materials, and the additional diagnostic time required to map cross-connections and flue integrity. Every quote is written, itemized, and delivered before work starts - Haven Standard Clause 1, “Have it in writing.” No “call for pricing,” no verbal estimates that change when the tech arrives. Bring us a competitor’s written quote and we’ll provide a Free Second Opinion.
Call (351) 444-9705 for an exact quote - estimates are free, and every one includes the camera inspection.
We Also Serve Cities Near Danvers

Our crews work throughout the North Shore, including Chimney Repair calls in Peabody, Beverly, Salem, and Lynnfield. Each community has its own housing stock and climate exposure - Salem’s waterfront Victorians, Beverly’s mixed-era neighborhoods, Peabody’s denser subdivisions - but the camera-evidence-first standard is the same everywhere. Dispatch from our Boston office coordinates scheduling across Essex County.
Serving Danvers, MA - Our Local Coverage Area
We’re based in the Danvers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Danvers

You don’t know without a camera inspection, and in Danvers’s center-chimney colonials, wrong-flue connections are exceptionally common. We were called to a center-chimney colonial off Hobart Street where a gas boiler had been tapped into a flue directly beside the original wood fireplace flue - with no flue liner between them. Using a camera pushed up the adjacent flue, we showed the homeowner the crossover: combustion gases from the boiler drifting toward a flue that had never been sealed, and a smoke chamber coated in glazed third-degree creosote from decades of wood burning the boiler had been re-breathing. We installed a DuraFlex liner in the boiler flue, rebuilt the smoke chamber with HeatShield, and re-sealed the crown - the homeowner watched the camera feed the entire time. A Level 2 inspection with camera documentation, standard under Haven Standard Clause 4, is the only way to map these connections accurately. Call (351) 444-9705 to schedule - estimates are free.
Repointing is enough only if the brick faces are sound and the crown isn’t actively leaking water into the stack. In Danvers, where salt air and freeze-thaw cycling have been attacking masonry for decades, spalling often indicates water has already fractured the brick’s outer surface. We camera-inspect the flue walls, test the crown with a hose, and photograph every spalled brick before recommending scope. If spalling is advanced, we cut out damaged brick and match replacement stock before repointing - otherwise the new mortar joints fail within seasons as the brick behind them continues to deteriorate. Typical combined spalling repair and repointing in Danvers runs $2,200-$4,200. Call (351) 444-9705 for a camera inspection and written quote.
Class III creosote - glazed, hardened, and ignitable - is the level that demands immediate cleaning and often mechanical removal. In Danvers’s unlined or improperly lined colonial flues, reduced draft temperatures from adjacent appliance venting can accelerate glaze buildup dramatically. We rate creosote during every camera inspection and show you the footage. If we find glazed buildup, we remove it with rotary mechanical systems, not brushes that polish the glaze smoother. A Level 2 inspection with creosote classification runs $275-$425. Call (351) 444-9705 to book before burning season.
Yes - especially in Danvers, where oil-to-gas conversions and unlined flue cross-connections create hazards independent of whether you light fires. Carbon monoxide can migrate through deteriorated mortar joints between flues even when the fireplace is unused. Water intrusion through cracked crowns continues year-round, accelerating spalling and structural damage. And if you’re selling, Massachusetts disclosure requirements and buyer inspection contingencies make a documented Level 2 record valuable. We inspect and document chimneys in Danvers every month of the year. Call (351) 444-9705 to schedule - estimates are free.
Check three things: whether a proper liner was installed in the gas appliance flue, whether the appliance is venting into the correct flue (not one shared with another appliance or an unused fireplace), and whether the original oil flue was properly abandoned or capped. In Danvers, we routinely find conversions where none of these were done correctly. The camera inspection takes 45 minutes, the footage shows you exactly what was found, and the written quote lists only what’s actually needed. No camera evidence, no repair recommended - that’s the standard. Call (351) 444-9705 to schedule before heating season demand peaks.
Ready to see what your chimney actually needs? Call (351) 444-9705 for a free estimate. Every visit includes an NFPA 211 Level 2 camera inspection, a documented photo record under Haven Standard Clause 4, and a written price before any work starts - backed by our 365-Day Done Right Promise.
Written by Corrine Halstead, Owner at Level Two Chimney Co., serving Danvers and the North Shore since 2009.





Before
After
Before
After
Before
After